2?line filters for converters and power electronics preliminary data 1500 v dc, 180 ... 1600 a, 40 c ordering code: b84142c*s081 date: 2009?10?09 v ersion: 51 ? epcos ag 2008. reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without epcos' prior express consent is prohibited.
2?line filters b84142c*s081 for converters and power electronics construction 2?line filter metal case features easy to install low weight reduced y?capacitance design complies withiec 60939, ul 1283, csa 22.2 no.8 applications photovoltaic solar panels wind farms power supplies frequency converters for motor drives, t erminals line side: bus bars load side: bus bars marking marking on component:manufacturer ' s logo, ordering code, rated voltage, rated current, rated temperature, climatic category , date code minimum marking on packaging: maufacturer ' s logo, ordering code, date code, quantity please read and cautions and warnings and important notes at the end of this document. page 2 of 10 b84142-a180__a1600-s81-51-7659 preliminary data
2?line filters b84142c*s081 for converters and power electronics t ypical circuit diagram t echnical data and measuring conditions rated voltage u r l ? l 1500 v dc rated voltage u r l ? g n d 1500 v dc t est voltage line to line for 2 s u t e s t 4200 v dc t est voltage line to case for 2 s u t e s t 4200 v dc rated temperature t r 40 c overload capability (thermal)for 3 min per hour or for 30 s per hour 1.5 x i r 2.5 x i r climatic category (iec 60068?1) 25/100/21 please read and cautions and warnings and important notes at the end of this document. page 3 of 10 b84142-a180__a1600-s81-51-7659 preliminary data
2?line filters b84142c*s081 for converters and power electronics characteristics and ordering codes i r t erminal crosssection r t y p approx.weight ordering code approvals a mm 2 mw kg 180 20 x 3 1 10 4 .9 b84142c0180s081 ? ? ? 250 20 x 3 1 10 5 .0 B84142C0250S081 ? ? ? 320 25 x 5 51 7 .8 b84142c0320s081 ? ? ? 400 25 x 5 48 7 .8 b84142c0400s081 ? ? ? 600 30 x 5 43 7 .9 b84142c0600s081 ? ? ? 1000 40 x 8 29 19 .9 b84142c1000s081 ? ? ? 1600 50 x 10 22 24 .5 b84142c1600s081 ? ? ? x = approval granted please read and cautions and warnings and important notes at the end of this document. page 4 of 10 b84142-a180__a1600-s81-51-7659 preliminary data
2?line filters b84142c*s081 for converters and power electronics dimensional drawings b84142a0180s081, b84142a0250s081 (180 a, 250 a) beschriftung marking beschriftung marking dimensional drawings b84142a0320s081, b84142a0400s081 (320 a, 400 a) beschriftung marking beschriftung marking please read and cautions and warnings and important notes at the end of this document. page 5 of 10 b84142-a180__a1600-s81-51-7659 preliminary data
2?line filters b84142c*s081 for converters and power electronics dimensional drawings b84142a0600s081 (600 a) beschriftung marking beschriftung marking dimensional drawings b84142a1000s081 (1000 a) beschriftung marking beschriftung marking please read and cautions and warnings and important notes at the end of this document. page 6 of 10 b84142-a180__a1600-s81-51-7659 preliminary data
2?line filters b84142c*s081 for converters and power electronics dimensional drawings b84142a1600s081 (1600 a) beschriftung marking beschriftung marking please read and cautions and warnings and important notes at the end of this document. page 7 of 10 b84142-a180__a1600-s81-51-7659 preliminary data
2?line filters b84142c*s081 for converters and power electronics insertion loss (typical values at z = 50 w) 0 20 40 60 80 100 10 4 10 5 10 6 10 7 10 8 f db hz unsymmetrical, adjacent branches terminatedcommon mode, all branches in parallel (asymmetrical) dif ferential mode (symmetrical) please read and cautions and warnings and important notes at the end of this document. page 8 of 10 b84142-a180__a1600-s81-51-7659 preliminary data
2?line filters b84142c*s081 for converters and power electronics caution and warnings please note the advices in our data book aemc filterso (latest edition); attention shouldbe paid to the chapter ageneral safety noteso. it shall be ensured that only qualified persons (electricity specialists) are engaged on worksuch as planning, assembly , installation, operation, repair and maintenance. they must be provided with the corresponding documentation. danger of electric shock. emc filters contain components that store an electric charge.dangerous voltages can continue to exist at the filter terminals for longer than five min - utes even after the power has been switched of f. the protective earth connections shall be the first to be made when the emc filter isinstalled and the last to be disconnected. depending on the magnitude of the leakage cur - rents, the particular specifications for making the protective?earth connection must be ob - served. impermissible overloading of the emc filter , such as with circuits able to cause reso - nances, impermissible voltages at higher frequencies etc. can lead to bodily injury anddeath as well as cause substantial material damages (e.g. destruction of the filter hous - ing). emc filters must be protected in the application against impermissible exceeding of therated currents by overcurrent protective. in case of leakage currents > 3.5 ma you shall mount the pe conductor stationary withthe required cross section before beginning of operation and save it against disconnect - ing. for leakage currents i l 4 ) < 10 ma the pe conductor must have a ku value 3 ) of 4.5; for leakage currents i l 10 ma the pe conductor must have a ku value of 6. 3) the ku value (symbol ku) is a classification parameter of safety?referred failure types designed to ensure protection against hazardous body currents and excessive heating.a value of ku = 4.5 with respect to interruptions is attained: ? with a permanently connected protective earth circuit 1.5 mm 2 ? with a protective earth circuit 2.5 mm 2 connected via shroud connectors (iec 60309?2). ku = 6 with respect to interruptions is achieved for fixed?connection lines 10 mm 2 where the type of connection and line layout corre - spond to the requirements for pen conductors as specified in relevant standards.4) i l = leakage current let?go please read and cautions and warnings and important notes at the end of this document. page 9 of 10 b84142-a180__a1600-s81-51-7659 preliminary data
2?line filters b84142c*s081 for converters and power electronics important notesthe following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. w e nevertheless expressly point out that such statement cannot be regarded as binding statements about the suitability of our products for a particular customer application . as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incum - bent on the customer to check and decide whether an epcos product with the properties described in the product specification is suitable for use in a particular customer application. 2. w e also point out that in individual cases, a malfunction of electronic components or failure before end of their usual service life time cannot be completely ruled out in the current state of the art, even if they are operated as specified . in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of a passive electronic component could endanger human life or health (e.g. in accident prevention or life?saving systems), it must therefore be en - sured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of a passive electronic compo - nent. 3. the warnings, cautions and product?specific notes must be observed . 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www .epcos.com/material). should you have any more detailed questions, please contact our sales of fices. 5. w e constantly strive to improve our products. consequently , the products described in this publication may change from time to time . the same is true of the corresponding product specifications. please check therefore to what extent product descriptions and spec - ifications contained in this publication are still applicable before or when you place an order . w e also reserve the right to discontinue production and delivery of products . conse - quently , we cannot guarantee that all products named in this publication will always be avail - able. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer?specific products. 6. unless otherwise agreed in individual contracts, all orders subject to the current version of the ageneral t erms of delivery for products and services in the electrical industryo published by the the german electrical and electronics industry association (zvei) . 7. the trade names epcos, baoke, alu?x, ceradiode, cssp , ctvs, dssp , miniblue, mkk, mlsc, motorcap , pcc, phasecap, phasemod, siferrit , sifi, sikorel, silvercap, simdad, simid, sineformer , siov , sip5d, sip5k, thermofuse, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www .epcos.com/trademarks. 1 please read and cautions and warnings and important notes at the end of this document. page 10 of 10 b84142-a180__a1600-s81-51-7659 preliminary data
|
